How To Use A Mason’s Hammer? [DIY Guide: Do’s & Don’ts] 

Mason’s hammer is an essential tool in the field of masonry work. It is widely used to cut bricks and stones in perfect shape for ease of work. However, clean-cut products and practical results are unavailable if this tool is not used correctly. That is why one of the concerns of users is how to use a mason’s hammer.

The unique shape of the mason’s hammer reveals a lot about its function. The flat and sharp edge of the hammerhead is primarily used for scoring or marking lines. A square or round edge is drilled into the other side of the head after the cut part is scored. The tool is primarily used for shaping and cutting in masonry work.

Therefore, do you need detailed procedures for using a mason’s hammer properly? Then jump into this article. Here I will mention the entire process concerning issues so that anyone can use a mason’s hammer.

5 Easy Steps To Use A Mason’s Hammer Safely: DIY Like A Pro

Initially, its use may seem tricky. Or many people think that only professionals know how to use it. That is not true. Anyone can do the required activity by learning the correct methods. Hence, here are some simple steps to make your job easier:

Step 1 Bring The Appropriate Hammer:

The first thing to do is to hire a suitable hammer. Different types of hammers are available in the market for various tasks. But mason’s hammer is mainly used to cut or break bricks, stones, coal blocks, etc. Its shape and features are also different. The head is heavy, and one part of the head is different from the other. One end is sharp, and the other is round. It may also have a wooden handle. So to learn this hammer, go and bring the right tool.

Step-2 Place On A Hard Surface:

Since we are about to cut hard and heavy objects, do not attempt to break them by keeping them on hand. The work can be done by placing the thing on a firm, flat surface. Therefore, the second step is to place the brick or stoneThesurface to cut.

Step-3 Select The Line:

A typical procedure for breaking or shaping bricks with a mason’s hammer is to inscribe a line with the sharp edge of the hammer across the part of the object to be cut or broken. At this time, you have to strike very slowly or the object’s shape. Otherwise, the whole thing may be cracked-up.

Step-4 Hold The Handle Properly:

This is an essential step in using a mason’s hammer. Because just holding the handle properly makes cutting easier and helps to avoid unwanted hazards. The hammer handle should be gripped before striking the brick or stone. Remember, using the end or top edge of the handle is the wrong way to do it.

Step-5 Hit Over The Line With Moderate Pressure:

Ideally, the last and final step of using a mason’s hammer is to strike with very moderate pressure on the targeted area. It is possible to cut the object in perfect shape only through gradual hitting(1). If you push too much at first, the desired shape will not be obtained, but the whole thing may be randomly broken and damaged. 

And this is not the proper way to use a mason’s hammer. So the work should be done according to the above rules with patience.

7 Things Should Do Before Using A Mason’s Hammer

While using a cutting tool like a mason’s hammer effectively and efficiently, there are a few things to keep in mind that are useless if you don’t know them. So, at this point, I will share some tips that, if followed, will ensure the proper use of a mason’s hammer.

1.Pick the Perfect Weight And Size:

Mason’s hammer is used to cut and break complex substances like brick and stone simultaneously. Consequently, its proper weight and size are essential. The weight of the hammer also contributes to cutting an object. On the other hand, since the user works with the hammer by hand, the heavy weight makes it difficult to work. 

Therefore, a convenient and perfect weight and size must be ensured. Generally, a mason’s hammer of 20-24 ounces is considered suitable for the job. However, the size and weight can be customized depending on the specific material to be cut.

2.Ensure Highest Quality Material:

Any product can benefit from reasonable material assurance. Mason’s hammer is no different. The heads of these hammers are typically metallic. These are made of steel or iron. On the other hand, the hammer’s handle is made of wood.

Handles made of various materials comfortable for the hand are currently popular. The most crucial factor is the hammerhead’s steel composition. In this case, no exceptions should be allowed. A high-quality steel hammer can transform your working environment.

3.Check The Sharpness:

Mason’s hammer is a tool for cutting and shaping. Its typical use is to cut brick, stone, or coal cleanly. And according to the mason’s hammer feature, one end of the head is flattened and beaten. But the thing to remember is whether it is sharp enough or not. Hitting with a blunt head can cause the object to become brittle and break, defeating the purpose of the job.

4.Strike On Right Angle:

Mason’s hammer cuts or breaks certain things into definite shapes. However, it is crucial to maintain the angle to break bricks or stones in the right shape. Randomly hitting can cause pressure in other places than the targeted area. 

As a result, the entire object may crumble, so the hammer will not cut to the desired shape. It is generally best to hit the thing at an angle of 30° to 45° initially and 90° at the end. However, it may be different depending on the situation.

5.Take The Comfy Handle:

The most important thing is to choose a convenient handle. If you can confirm this, the hammer’s difficulty is reduced, and the work output is also sound. In this case, it should be kept in mind that since the mason’s hammer has to be lifted with one hand to work, its weight cannot be high. Heavy hammers are difficult to lift with one hand. 

Also, make sure that the wooden handle is smooth enough. Nowadays, cushioned or mushroom handles are available which do not blister the hands even after prolonged use. This kind of comfortable hammer handle can be chosen.

6.Functionality And Stability:

Consider whether your mason’s hammer is suitable and durable for the job required. Knowing about the hammer’s features and material quality, anybody can easily understand the issues. Note the weight and sharpness of the hammerhead for functionality considerations. 

Again the head and handle material, the joint in the middle, tells how durable the product is. However, with careful usage and storage, durability can be increased.

7.Protect Yourself:

There are some risks to using a mason’s hammer. Safety measures must be ensured before working. Firstly, it is essential to protect the eyes from damage. Therefore, safety glasses, goggles, or face shields can be used. Besides, wear hand gloves to prevent hand blisters. Also, keep the other hand safe while striking.

Dangers Of Using A Mason’s Hammer Without Knowing ABC

If you start work without basic knowledge, questions about its effectiveness and various problems may arise. And the task of masonry cutting is not so easy. That is why basic knowledge is required here. Otherwise, there is a risk of various dangers. This time I will mention such dangerous aspects to raise awareness among all:

Mason’s hammer is a reasonably heavy tool, and one end of its head is quite sharp. If somehow the hammer falls over the leg, serious injury may occur. Moreover, the user should keep the other hand away from the cutting or breaking area. Otherwise, carelessness may cause hand injury or even irreparable damage.

Serious Injury:

  • Eyes May Damage:

We may have noticed that striking with a hammer causes small pieces of brick or stone to be thrown around. This is dangerous. If the fragments somehow enter the eye, they can permanently damage the precious organ like the eye. Many even start breaking bricks with hammers carelessly at random. As a result, the flying brick particles can damage the eyes(3) of anyone nearby.

  • Destruction Of Surface:

This problem occurs when people do not know how much force is required to strike an object. We understand that brick or stone should be placed on a hard surface before being cut with a mason’s hammer. It is not yet over. Users must work while keeping the surface safe.

 However, it can be costly when someone damages the surface by striking things hard. Furthermore, the user and others may be in danger unless the surface breaks.

  • Hammer Can Discard:

Many people have heard of a mason’s hammer flying out of his hand while working. This can happen to anyone, but the inexperienced are more likely to be affected. It is also possible for the hammer’s head and handles to separate during the strike. When the hammer joint is loose, this happens. However, they can be extremely dangerous.

A List Of Do’s And Don’ts For Using Mason’s Hammer

A detailed discussion has been made, and many things have been displayed. Now take a  quick look at this list of do’s and don’ts so that using a mason’s hammer can be easy and enjoyable.

                  Do’s            Don’ts
Maintain distance         while hammering1. Closer to hammer
Keep good balance2. Strike hardly
Check the hammer’s joint3.  Hammerhead with too much wear.
Choose Perfect Position4. Heavier hammer 
Suitable Hammer for every Purpose5. Unfit handles
Follow the line while hitting.6. Random hitting
Wear safety glasses or face shields. 7. Work with bear eyes
Work on hard surfaces8. Striking over hand

Related Questions:

Can You Use A Mason’s Hammer Yourself Without Knowing Anything?

Mason’s hammer can be used for general purposes. It can be used even though no special knowledge is required. However, when you do not know how to use it correctly, you may encounter various issues and fail to achieve the desired results. The Mason hammer may appear to be a simple tool, but it is specialized. Anyone who suddenly wants to use it will have to pick up some speed.

Where Do You Use A Mason’s Hammer?

A mason’s hammer is an essential tool for use as a cutting tool and in masonry activities. It is used in construction work to break bricks and stones and cut according to shape. However, many people use a mason’s hammer for small needs at home.

For the unique feature of this hammer, brick, stone, or coal block can be cut in an immaculate shape. Also, special procedures need to be followed for this. This tool is used in factories or any building work. But the usage in other cases is less.

How Do You Purchase The Original Mason’s Hammer?

After knowing the characteristics of a mason’s hammer, anyone can easily buy the original one. For example, the head of the mason’s hammer differs from other hammers. One edge of the head is sharp, flat, and beaten, and the other end is round or square. It is pretty different from other hammers available in the market.

Besides, the head is made of good quality steel or iron metal. The maximum case has smooth wooden handles. So, the original mason’s hammer can be recognized by looking at the features. Amazon Also provides the actual product. Just order them according to choice.

Is Using A Mason’s Hammer Difficult And Risky?

Working with a mason’s hammer can be difficult and dangerous only when someone doesn’t know how to use it correctly and doesn’t follow safety precautions. Indeed, such a specialized tool must be created for specific tasks. As a result, it is inconvenient to use without prior experience.

For example, cutting or breaking the stone with any idea will not provide a clean shape. Also, the entire thing may crumble. Again, there is a risk of serious harm by not protecting oneself while working. Furthermore, random use of hammers may lose benefits. Working with this tool necessitates knowledge and professionalism.

What Is A Mason’s Hammer Used For?

Mason’s hammer is mainly used for cutting, breaking, or clean-cutting brick, stone, coal, or hard blocks(2)made of cement more effectively. This tool is specially designed for masonry cutting, so its features are also distinct.

Mason’s hammerhead has a sharp edge that is perfect for cutting, and the other is round, which can be used for different tasks. However, this hammer’s weight, size, and material are specifically designed for masonry work.

Final Touch: 

Masonry work has been slightly hardened. It is difficult to obtain them. Manual tasks, on the other hand, gradually become easier with proper knowledge. Anyone can use this tool to recover useful jobs by following the steps correctly. However, extreme caution is required to avoid serious injury when using a hammer.

This article goes over how to use a mason’s hammer in great detail. It will be helpful for those who are clumsy when using this tool. Furthermore, if the details above are kept in mind, anyone can have the best experience with a mason’s hammer.

Reference

(1)English, T. (2016, May 24). Cutting Stones into Natural Shapes with Hand Tools. Interesting Engineering. Retrieved July 30, 2022, from https://interestingengineering.com/culture/cutting-stones-natural-shapes-hand-tools

(2)Hart, G. (1927). Geological Hammers. American Mineralogist. Vol.12 (9): 354.  

            Retrieved 30 July 2022, from https://pubs.geoscienceworld.org/msa/ammin/article-abstract/12/9/354/536612/Geological-Hammers?redirectedFrom=fulltext.

(3)Mattila, M., Karwowski, W., & Vilkki, M. (1993). Analysis of working postures in hammering tasks on building construction sites using the computerized OWAS method. Applied Ergonomics, 24(6), 405-412. https://doi.org/10.1016/0003-6870(93)90172-6

Masud Rana

This is Masud Rana. I run this blog. My Tools Guide is a blog where I share product reviews of different tools. Stay tuned to get more helpful articles!

Recent Posts