How To Use An Electric Brad Nailer? [All You Need To Know]

Electric brad nailers have changed the experience of trim work. Both professional and non-professionals can perform DIY home decor like assembling small wooden components, tiny furniture, cabinet construction, corner fixing, and so on. The duties are made incredibly simple by this equipment. So, let’s learn how to use electric brad nailers easily.

Brad Nail is an electrically powered device that stores electricity through air compression. The magazine of the machine is loaded with an 18 gauge brad which means small nails and the nail is inserted into the base by pressing the trigger after aiming at the specified position. Nailers are mainly used to join two or more surfaces.

However, owing to a lack of expertise, people get irritated while using electric brad nailers. Today I will give a thorough explanation of using a brad nailer. After reading the post, I guarantee that all of your uncertainty and issues will be gone.

6 Simple Steps Of Using an Electric Brad Nailer

When using any tool, the first thing is to know the procedure. If you want to successfully do the necessary trim work using an electric brad nailer, it is important to follow some periodic rules. The rules laid down in this article are described in 6 steps so that they can be learned in a very organized way.

Step-1 Choose The Proper Brad:

The first thing to consider when using an electric nailer is to determine the correct and appropriate. Different sizes and shapes of brads are available for different tasks. You can get into trouble with them without understanding the need.

Generally, 18 gauge nails are enough for mini household work or DIY projects. In the field of trim work, it is known as brad nail. 23 gauge pin nails are also widely used. But for the general user,18 gauge brad nails are just fine.

Step-2 Set The Nailer: 

The battery must be removed at the beginning of the electric brad nailer setup. Otherwise, the nail will not be able to be set. The nails are then put in the magazine. Put the nails in the front door. It should be kept as near to the chamber as possible. The nailer will not operate correctly while pressing if the front edge of the magazine is blank.

The upward and downward lines on the nail should be noted while setting it. Pin nails feature an ‘Aero’ symbol, and brad nails also have marks. The markings should be arranged. The door should then be locked.

Step-3 Attach The Battery:

Since the battery was left open at the start, it must be reconnected to the nailer to finish the setup. It will not function otherwise. Because this is a cordless electric brad nailer, it cannot be used without a battery. The battery must be installed beneath the nailer’s body to finish the configuration.

Step-4 Select The Position:

One of the most important steps in using an electric brad nailer is to fix the surface position. It is necessary to identify in advance which places to push the nailer. Determine the locations as needed. As a result, extra nails will not be wasted and the work will be done smoothly.

Step-5 Press The Trigger:

After determining the position the nailer is ready for use. At this stage, trim work can be started by pressing the trigger. In the case of Brad nailer, it takes a minimum time for the nail to come out and properly insert into the wood or board. So till that time, the trigger should be kept pressed.

Step-6 Insert The Brad:

When using a brad nailer, ensure that the brand is correctly inserted at the end. Since these are used for joining the wooden board, the whole thing is useless without a brad insert. Of course, the length of the nail is also important in this case. But the last step at work is to check that brand has been entered properly. Again, if the excess part of the nail is exposed, it must also be adjusted.

Things You Should Consider Before Using An Electric Brad  Nailer:

Working with tools like a brad nailer entails considerable danger. Also, due to carelessness, various troubles may arise during the trim work. However, there is a way out of this. At this stage, I will mention some precautions to make electric brad nailers safer.

Use Goggles, Mask, And Hearing Protection:

When undertaking trim work with electrical equipment, the first thing to remember is “safety first.” While diving, goggles must be used to prevent flying particles from entering the eyes. Electric nailers create a lot of noise. Long-term exposure to such noises can be harmful to one’s hearing.

As a result, it is critical to wear hearing protection when working. Furthermore, wearing a mask at work gives general advantages and prevents unintended injury.

Do Not Drive On Metal:

Brad nailer is driven on a wooden or melamine board. Other materials do not apply to this. And the brad nailer is unsuitable for use on metal. Suppose you are driving the nailer on a wooden surface, there is a metal substance under that. Be careful. Driving a nailer over metal can lead to disaster.

Avoid Too Much Nail:

Sometimes brad nails can be larger than the surface. Using such nails may leave the excessively exposed part after insertion, which is not convenient. Moreover, this extra part can create various disturbances and cause injuries. So the better solution is to choose the right length of nails. A one-and-a-half-inch wide nail is enough for general tasks.

Lock Magazine Door Carefully:

A terrible accident might occur if the magazine door is not securely secured. So, the front door should be secured appropriately after the nail is in place. Otherwise, the nails might fall out while driving, causing an accident.

Regardless of ambiguity, the door must be opened and locked again. As a result, the magazine door must be checked and approved before beginning work.

Never Overdrive:

The surface or furniture on which you will use the brad nailer is unquestionably valuable. As a result, this is critical to safeguard them. Attaching or joining is done by driving the nailer and inserting the brad while driving. This approach develops holes on the surface, which is required.

However, overdriving the nailer without noticing might result in considerable holes in the hardwood board, eventually destroying the material. To avoid such harm, stop overdriving.

7 Pro-Tips For Using An Electric Brad Nailer Avoiding Any Hazard:

Anybody must wonder how many rules must be followed when using an electric brad nailer. But no worries to hear the warning. To get desired results, you have to work knowingly. And that is why here are some tips that will make using a brad nailer a breeze:

Tip 1- Use Adhesive:

Using any glue while working is a required method. Nailers are significantly easier to utilize for trim work when two surfaces are involved. In between, some gum is placed. The pressure of pushing the nailer can sometimes cause the board to shift. As a result, the ideal output is unavailable. In that situation, a small amount of gum can simplify your task.

Tip 2- Always Check The Magazine:

There will be fewer difficulties unless the magazine is examined after setting up and starting work. The magazine is an essential component of a brad nailer. When there is an issue, the nailer will not function correctly.

So, check the magazine carefully. This stage includes setting the nails in front of the chamber, aligning the nails with the up and down marks, and locking the magazine door.

Tip 3- Never Bruising On Wood:

When driving the nailer on the wooden material, there are often specific issues, such as the nail not coming out or not entering correctly. Sometimes the nail surface is only partially pierced. Attempting to drive on the wooden board in this state may harm it and may render them useless in the future. In such a circumstance, the nailer should be sent in for service. However, don’t overburden the wood.

Tip 4- Pick The Suitable Size: 

The task can be handled very smoothly if you choose the appropriate nail considering the thickness of the surface. The 18 gauge nails are enough and can be easily used for mini household work and DIY projects (1).

And they are one and a half to two inches in height, so they adhere perfectly to the surface. However, some care should be taken while joining the surface so that the nails cover the top part of the thickness of the two boards.

Tip 5- Buy The Perfect Set-up:

A thorough setup may drastically improve your electric brad nailer experience. As a result, people may invest in a suitable setup while purchasing. For instance, compressors with a brad nailer, batteries, and minor servicing tools can be bought for emergency repairs.

Tip 6- Fill The Nail Hole In Right Way:

The silkiness of work is very necessary in the case of trim work. A simple task can attract anyone’s attention just for a smooth and beautiful finish. Those who use brad nailers must have noticed that a small hole remains in the nail head after insertion.

It is very typical. These holes are formed when the nailer is driven. But the rule is to cover these holes with the help of putting after the work. Then the hole is recovered, and the nail is protected. 

Tip 7- Ensure Safety: 

Everyone must keep themselves safe while using the electric brad nailer. Therefore, all safety measures should be taken beforehand to avoid unwanted injuries. Such as goggles, face masks, shields, etc. Moreover, you will get a professional feel while getting ready and working like this. While using these, keep your distance from the nailer while working. This will reduce the chances of having an accident.

Other considerations include checking for metal beneath the surface, ensuring that no excess nails are visible, and so on. I probably can’t imagine how simple it will be to handle an electric brad nail once simply take a few precautions.

Related Questions:

What Is The Working Mechanism Of An Electric Brad Nailer?

An electric brad nailer is an electric-powered device. It essentially stores electrical charge through air compression. The brad nailer can be both corded or cordless. Before working, the brads must load into the magazine (3).18 gauge nails are fired by this nailer into various wood boards. A brad nailer is unsuitable for use on metal.

The trim works, which were usually done with the help of a hammer and nails, can now be done flawlessly with the help of electric power with this brad nailer. However, operating the nailer without an electric power connection or battery is impossible.

Is It Ok To Trim With An Electric Brad Nailer?

Brad nailer is suitable for trim work because of Brad’s features. They are so thin and delicate that they are the best option for homework and any DIY project. Besides, being electric power-based saves time and energy.

Brad Nailers has become an intelligent company in the field of trim work. Due to its easy-to-use method, even new users can work efficiently. However, this brad nailer does not work well on heavy bases due to the fineness of the brand.

What Is The Best Way To Load The Electric Brad Nailer?

The best way to load the electric brad nailer is to complete the setup by following the step-by-step rules. First, after removing the battery, open the magazine door and set the appropriate brad nailer. After that, the door should be locked, and the battery should be connected. Random shooting cannot be done. The beige position should be selected in advance.

Anyone will benefit from being aware of the need to always select adjustable brad. Also, avoid going into overdrive when shooting, and when any disruption occurs, take the required precautions. In this case, steadily progressing may be the ideal strategy to load a brad nailer.

Can Adjusting An Electric Brad Nailer Be Difficult?

Adjusting the electric brad nailer is as simple as following a few simple steps. Basic understanding of eligible brad selection, magazine checking, appropriate driving, battery power setting, and so on may greatly assist in total adjustment. That is if you can finish the machinery correctly and don’t have to worry about nailer adjustment.

Although it cannot be driven without electricity, this is not a significant difficulty in today’s globe. In the area of trim work, an electric brad nailer saves both labor and time. As a result, adjusting the machine is a piece of cake.

What Do You Do If Your Electric Brad Nailer Is Not Working?

Suddenly, the nailer may not be shot from the electric nailer, or the base is not inserted deeply. Such a problem can occur mainly if the air compressor leaks. (2) Sometimes, it is seen that the nailer is working even after pulling the trigger repeatedly. In this case, the air leak is through the trigger.

Also, a small, low-volume compressor can be used because the electric nailer does not demand much air pressure. In this case, there is no way but to replace the trigger.

Again, for dust and dirt, the driver can be affected by the hammer. In that case, cleaning with lubricant solves the problem.

Final Verdict:

Using an electric brad nailer to do the necessary trim work is very effective and efficient. Furthermore, in this day and age, learning to utilize such a gadget is not difficult. Plus, consider how much easier a brad nailer has made our previous style of trim work!

However, we must continue cautiously, understand the proper processes for operating an electric brad nailer, and be aware of any hazards. You can also maintain the other recommendations stated in the post. Working with these elements with expertise and attention can provide long-term gains.


(1)Beacham, B. (2021, September 2). Brad Nailer vs Finish Nailer: What’s the Difference? Bob Vila. Retrieved August 7, 2022, from

(2)Chan, K., Clark, G., Helmlinger, D., & Ng, D. (2013). Electromagnetic Coil Gun Final Report. Retrieved August 7, 2022, from

(3)Moon, S., Kumara, S., & Simpson, T. (2005). Knowledge representation for product design using tech specs concept ontology. IRI -2005 IEEE International Conference On Information Reuse And Integration, Conf, 2005., 241-246.

Masud Rana

This is Masud Rana. I run this blog. My Tools Guide is a blog where I share product reviews of different tools. Stay tuned to get more helpful articles!

Recent Posts